Mobiclinic ROPE Anweisungen Seite 20

Toilet chair with castors
FR IT DE PT NL SW PL DA
EN
ES
ROPE
STEP 7: To fit the footrest (4), face the wheelchair and insert the footrest frame into the recess at the top of
each front wheel. To attach it, proceed in the same way as with the rest of the chair, insert the screw, the
washer and then the nut to secure it correctly. The footrest can be folded upwards.
STEP 8: Next, install the seat (6). To do this, simply press down as shown in the picture until it reaches the
stop (there should be a "click" sound). This seat can be folded upwards as explained below.
STEP 9: Finally, attach the potty bucket (7). To do this, fold the seat upwards and insert the potty bucket in
front of the chair, which will be attached to the bracket that was previously installed (figure 8). To remove
the urinal bucket, follow the same process
20