Service Menu - Kostrzewa ecoMAX860P3-O TOUCH (VG) Bedienungsanleitung

14. Service menu

80
14. Service menu
Access to the menu is password protected.
Service settings
Burner settings
Boiler settings
CH and DHW settings
Buffer tank settings*
Mixing valve 1-5 settings*
H output
Restore default settings
Restore default settings
Touch panel calibration
Burner settings
Startup
Heating time
Startup fuel batch
Flame detection
Startup blow-in
Startup time
Operation
Maximum burner power
Maximum FL burner power
FL burner minimum power
Blow-in settings:
· Blow-in nominal power
· Oxygen nominal power*
· Blow-in intermediate power
· Oxygen intermediate power*
· Blow-in minimum power
· Oxygen minimum power*
OPERATION mode cycle time
Blow-in delay
Monitoring time
Feeder output
Fuel calorific value
Operation with oxygen sensor*
Cleaning
Max. linear actuator operation time
Linear actuator extended
Linear actuator retracted
Leader in pellet boilers
Ash removal time
Heat exchanger cleaning time
Variable grate geometry
Control
Actuator at nominal power
Actuator at minimum power
Linear actuator delay
Actuator stroke at return
Burner stroke at return
Idle time at return
Cleaning - interval
Cleaning - movement
Grate - wood
Maximum startup time
Blow-in operation - monitoring
Blow-in idle time - monitoring
No fuel detection time
Storage bin settings
Storage bin volume
Fuel level sensor
Minimum fuel level
Feeder
Output test time
Feeder output test
Fuel weight
* not available if no sensor or additional module is installed
or the parameter is hidden.
Boiler settings
OPERATION MODE
Return protection
· 4D return protection
· Return hysteresis
· Minimum return temperature
· Valve closing
ON / OFF
Maximum boiler temperature
Select thermostat
Boiler hysteresis
Pump disabled by thermostat
Platinum Bio ecoMAX 860P User Manual – EN 09.17
OFF
OFF
ON / OFF