VEVOR 2T Bedienungsanleitung

Model: 2T/1T
(The picture is for reference only,
please refer to the actual object)
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please
feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before
operating. VEVOR reserves a clear interpretation of our user manual. The
appearance of the product shall be subject to the product you received. Please
forgive us that we won't inform you again if there are any technology or software
updates on our product.
01
SAFETY INSTRUCTION AND
BEAM
CLAMP
WARNING:
Read this material before using this product. Failure to
do so can result in serious injury.
1. This product is not a toy. Do not allow children to
play with this item.
2. Use as intended only.
3. Do not overload; ensure use within its bearing
capacity.
4. If the beam clamp is used as lifting machines,while
lifting the load,passing or workongunder a lifting load is
strictly.
5. The direction of lifting or towing load must be
perpendicular with base I-beam.
6. Leading screw fastener screw etc. Should be
regularly.
7. Follow manufacturer instructions and safety
recommendations, especially in special environments.
02
PRECAUTIONS
APPLICATION SPECIFICATION
(1) Beam clamp is a equiprment that can quick form
hanger or connecting point in I-beammonorail.
(2) The beam clamp should be formed a complete set
with chain hoist or other liftingmachines.
(3) The beam clamp was installed on the bottom flange
of i-beam.
(4) The beam clamp is adopt left and right screw
thread construction for leading screw.clamoing is quick
in operation.
Items Description
1 Name Beam Clamp
2 Model 2T
Safe carrying weight：2T
3 Parameter
Colour：yellow or black
Items Description
1 Name Beam Clamp
2 Model 1T
Safe carrying weight：1T
3 Parameter
Colour：yellow or black
03