Operation - Hama TS33C Bedienungsanleitung

Warning
• Buy special or suitable installation material from a specialised
dealer for wall-mounting.
• Ensure that no faulty or damaged parts are installed.
• Never apply force during installation. This could damage the
product.
• Before installation, ensure that the chosen wall is suitable for
the weight to be installation, and make sure that there are
no electrical wires, water, gas or other lines in the wall at the
installation site.
• You can position the measuring station on a level outdoor surface
using the base.
• We recommend installing the measuring station securely on an
outdoor wall.
• Install an anchor, screw, nail, etc. in the wall of your choice.
• Hang the measuring station using the opening intended for this
purpose (5).

6. Operation

6.1. Default setting
• After opening the battery compartment, first choose the channel using
the CHANNEL button.
• Only then, insert the batteries into the battery compartment with the
correct polarity.
• Press the RESET button.
• Then replace the battery compartment on the outdoor sensor.
6.2. Connection to the measuring station
• To connect the measuring station and the outdoor sensor, place the
two devices as close together as possible.
• After you insert the batteries, the base station automatically searches
for a connection to the measuring station and performs initial setup.
6