Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. pressure input (+)
2. differential pressure (-)
3. LCD-display
4. Press
to changes the temperature units. In Setup mode, press
Setup option you want to change or press
mode, press
to select the desired sample number.
5. Press
button to turn on the backlight. Press it again to turn off the backlight. Press
button for 3 seconds to start or exit Setup. (See "Changing Setup Options.")
6. Press
to Changes secondly showing number units. In Setup mode, press
to the Setup option you want to change or press
Recall mode, press
to select the desired sample number.
7. Press
button to store sample data or press
mode.
MAX
MIN
8. Press
to step through the maximum, minimum, and average readings. To exit the
MAX/MIN/AVG mode, press the
button for 2 seconds to return to normal operation
MAX
MIN
P/V/F
9. Press
to show the air velocity, press
rectangular or the diameter circular duct, press
to show differential pressure again.
P/V/F
10. battery cover
11. Press
to turn the thermometer on or off.
12. Press
to freeze or unfreeze the displayed readings. Press
seconds to zero out the display.
13. Pitot tube for measuring of airflow
14. Press
button and hold 2 seconds to enter Recall mode. In Recall mode, press
to calculate the sample data. In Setup mode, press
Press
again to store the displayed setting in memory.
to scroll to the
to increase the displayed setting. In Recall
to increase the displayed setting. In
button to clear sample data in Recall
P/V/F
secondly to show the high and length of a
thirdly to show the air flow, press
P/V/F
button and hold 2
button to enter a Setup option.
-24-
to scroll
Werbung
Inhaltsverzeichnis
