Herunterladen Inhalt Inhalt Diese Seite drucken

Klarstein 10031433 Bedienungsanleitung Seite 77

Klimaanlage splitgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
• Do not use the unit in the immediate surroundings of a laundry a bath a shower or a swimming pool.
Outdoor unit
• Select a location
◦ where the noise and outflow air emitted by the outdoor unit will not affect neighbourhood.
◦ that is well ventilated and dry in which the outdoor unit won't be exposed directly to sunlight or
strong wind.
◦ where the unit is not exposed to direct sunlight.
◦ which is able to withstand the weight of the outdoor unit.
◦ which is out of reach for children and far away from animals or plants. If it is unavoidable, please add
fence for safety purpose.
• Ensure the installation meets the requirement of installation dimension diagram.
• Do not use the unit in the immediate surroundings of a laundry a bath a shower or a swimming pool.
Safety precautions
• Must follow the electric safety regulations when installing the unit.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
• According to the local safety regulations, use qualified power supply circuit and air switch.
• An air switch having a contact separation of at least 3mm in all poles should be fixed in fixed wiring.
• The appliance shall be installed in accordance with national wiring regulation.
• The air switch must have the functions of magnetic tripping and heat tripping in order to prevent short
circuit or overload. Please install the air switch with suitable capacity according to the sheet below.
• Make sure the power supply matches with the requirement of air conditioner. Unstable power supply or
incorrect wiring may result in electric shock, fire hazard or malfunction. Please install proper power supply
cables before using the air conditioner.
• Properly connect the live wire, neutral wire and grounding wire of power socket.
• Be sure to cut off the power supply before proceeding any work related to electric safety.
• Do not put through the power before finishing installation.
77

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

10031432

Inhaltsverzeichnis