Klarstein 10031433 Bedienungsanleitung Seite 54

(This function is applicable to partial of models.)
9 SLEEP button
Press this button to go into the SLEEP operation mode. Press it again to cancel this function. This function is
available in COOL, HEAT (Only for models with heating function) mode to maintain the most comfortable
temperature for you.
10 TEMP button
Press this button can see indoor set temperature, indoor ambient temperature or outdoor ambient tempera-
ture on indoor unit' s display. Temperature is set circularly by remote controller as below
• When selecting no display by remote control or no display, the temperature indicator on indoor unit displays set
no display
temperature.
• When selecting by remote control, the temperature indicator on indoor unit displays indoor ambient
no display
temperature.
• When selecting by remote control, the temperature indicator on indoor unit displays outdoor ambient
temperature.
no display
Notes: Outdoor ambient temperature display may can't be selected for some models. When ndoor
unit receives signal, it displays indoor ambient temperature. Only for the model whose indoor
unit have dual-8 display.
11 TIMER ON
Press this button to initiate the auto-ON timer. To cancel the auto-timer program, simply press this button
again.
• After press of this button,  disappears and "ON" blinks. 00:00 is displayed for ON time setting. Within
5 seconds, press + or - button to adjust the time value. Every press of either button changes the time
setting by 1 minute. Holding down either button rapidly changes the time setting by 1 minute and then 10
minutes. Within 5 Seconds after setting, press TIMER ON button to confirm.
12 CLOCK button
Press CLOCK button, . blinking. Within 5 seconds, pressing + or - button adjusts the present time. Holding
down either button above 2 seconds increases or decreases the time by 1 minute every 0.5 second and then
no display
54