EuroLite LAS-10 Bedienungsanleitung Seite 17

The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
The protections must only be proyected in the blocked showlaser area. Please refer to the explanations
under showlaser area.
Electric connection
This product is allowed to be operated with a direct current of 6-9 V.
The device must only be operated with 4 x 1.5 V Mignon batteries, AA or with the included power unit. The
power unit falls under protection-class 2 and the device under protection-class 3.
Batteries
Batteries are hazardous waste which need to be disposed of appropriately. If the device is to be disposed,
the batteries have to be removed first.
Make sure that the poles are correct when inserting the batteries.
Never let batteries lying around openly as there is the danger that these can be swallowed by children or
domestic animals. Immediately consult a doctor when batteries are swallowed!
Leaking or damaged batteries can cause irritations when getting into contact with the skin. In this case use
appropriate protective gloves.
Make sure that the batteries cannot be short-circuited, thrown into the fire and be charged. There is a danger
of explosion.
Installation
This device is only allowed for an installation via the mounting bracket. In order to safeguard sufficient
ventilation, leave 50 cm of free space around the device.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Always fix the fixture with an appropriate safety-rope.
Notification
Before operating a laser of the classification 3R for the first time, the operator must notify the accidence
insurance, the authority for industrial safety and all relevant authorities of the respective country.
Notification should include the following information: manufacturer, laser classification, optical power and
wavelength.
Operation
For a safe operation, the laser products must be equipped with all protective measures demanded for their
classification and use.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
17/26 00038520.DOC, Version 1.1