Santec VTC-369IRPW Bedienungsanleitung Seite 31

Bedienungsanleitung / User Manual
VTC-369IRPW, VTC-369IRPG
Procedure:
1. Loosen the safety screw at the housing ring.
2. Carefully twist the housing ring off the mounting ring.
3. Use suitable screws to fix the mounting ring in the desired position (wall or ceiling).
4. Put the camera ball into the ball cup and attach them to the mounting ring using the
housing ring. Don't tighten it too much but ensure that the camera ball is still free to
move so that you can adjust the lens (see chapter 1.2).
5. Connect the video and power cables.
6. Only after the lens adjustment has been made, seize tight the housing ring to the
mounting ring (see chapter 1.2).
7. Tighten the safety screw at the housing ring.
8. Use the focus adjuster (included in the delivery) to set the lens' focal length and
zoom.
Note:
A technical drawing including dimensions and information on mounting holes is included in
the appendix.
Attention:
The camera ball must not be opened which would invalidate the warranty.
_________________________________________________________________________________
- 31 -