Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Regulations - Gastros InductWarm 130+ Betriebs- Und Montageanleitung

Warmhalten
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Safety Regulations

Responsibility
The InductWarm
130+ reflects the state of the art and has been built in accordance with the valid CE guidelines. Safe
®
operation is assured. The InductWarm
physical or mental limitations, unless they are instructed and monitored while using the appliance by a person res-
ponsible for their safety.
Gastros Switzerland AG disclaims all liability in cases due to unauthorised conversions or modifications by the custo-
mer. If the main supply cable for the appliance is damaged, it must be replaced by the manufacturer, an authori-
sed service agent or other similarly qualified person in order to prevent hazards. The connection for the mains plug
should always be positioned, so that it is freely accessible. If this is not possible, a master switch for the appliance
must be installed by the customer. In the event of a malfunction, the appliance must be switched off completely by
unplugging the main plug or by turning off the master switch.
When transporting, setting up, maintaining and repairing the InductWarm
following regulations and guidelines that are applicable in your country must be observed:
Regulations of professional electricians' associations, e.g. VDE, SEV, etc.
EC directives (in EU countries)
Accident prevention regulations
Guidelines of employers' liability insurance associations
Trade regulations
If the InductWarm
niture, decorative panelling, etc., it is recommended, that these objects consist of non-combustible material;
otherwise they must be covered with a suitable non-combustible, heat-insulating material and the fire safety
regulations are to be observed extremely carefully.
Intended Use
The InductWarm
®
system or the dishes.
Only use dishes, which have been approved as induction compatible by the producer.
The surface of the InductWarm
Only use suitable pans with a minimum base diameter of 12 cm for induction warming. Theoretical, it is possible
to use smaller dishes, but this may result in the following:
– Reduced efficiency
– Pan recognition may not be possible
– Radiation may be greater
Never heat a pan while empty. This could cause the pan to overheat.
Once you have removed the pan after warming, remember to switch the InductWarm
you intend to use it again straight away. This will prevent the appliance from heating up accidentally should you
or someone else place a pan on the warming surface.
Do not heat up tins or other sealed containers, as these can explode! Items that are unsuitable for use include any
dishes that are not specifically intended for induction appliances, as well as metal splash guards, aluminium foil,
cutlery, jewellery, watches, metallic objects, etc.
The induction hob is officially switched on as soon as the rotary switch is moved away from the off position (red
line aligned with status indicator). Whenever the hob is not in use, the appliance must be switched off.
130+ appliance is not intended to be operated by children or persons with
®
130+ appliance is being installed in close proximity to a wall, partition walls, kitchen fur-
®
130+ is designed to keep food warm in induction capable dishes. Other use can destroy the
®
appliance should not be used for storage.
130+ appliance, the latest version of the
®
130+ appliance off, unless
®
21

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

8 13 200 00

Inhaltsverzeichnis