Inhaltsverzeichnis
Werbung
Sealing the LNB connection
Dear customer,
in order to prevent any moisture from entering the Multytenne LNB, please use the self-sealing duct tape
supplied to insulate and seal the LNB connection.
1.
First remove the foil from the sealing tape.
2.
Apply one end of the sealing tape approx. 1-2 cm below the F-connector.
3.
Now stretch the sealing tape as much as possible, and wrap it around the co-axial cable and the
F-connector, with overlapping edges. Stretching the sealing tape ensures that the layers of tape
form a sealed bond at the overlapping edges.
4.
The LNB is now insulated and sealed, so that no water or humidity can penetrate.
7
Multytenne
- Quicklinks:
- Fehlersuchhilfen
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
