Function and features
This sensor detects metals without contact and indicates their presence
by providing a switched signal.
Nominal sensing range (Sn) see type lable; operating distance (Sa)
0...0,81 x Sn (Values based on standard measurement with mild steel;
a shorter sensing range for other metals).
Installation
Screw the sensor to a firm base. If there is high mechanical stress,
ensure that it cannot work loose. Non-flush mountable (fig. 1).
• Open space around the sensing face when mounted in metal: fig. 2
and 3.
• Minimum distance when several sensors of the same type are
mounted: fig. 4 and 5.
The socket can be rotated:
4
4