Example For Dip Switch Setting; G/S Functions; General - Vestamatic Rolltec Plus Montageanleitung Und Bedienungsanleitung

83100311 H1.qxd 20.06.01

Example for DIP switch setting

The table below shows the various setting options. The position of S1
determines whether day or week function was selected.
Preset default Day function (S1 = OFF)
setting: No Astro correction time (S6 = OFF)
No reverse function (S7 and S8 = OFF)
Day
Y123$5678X
Example of the DIP switch position for North-Rhine Westphalia.
For other states, please see pages 58 and 59.
For DIP switch S6, see page 57, for S7 and S8 see page 60.
Week
Y!wert678X
DIP switches S2 – S5 do not have any function for this setting.
For DIP switch S6, see page 57, for S7 and S8 see page 60.
09:17 Seite 63
Special functions
- 61 -
G

G/S functions

Your roller shutter control Vestamatic Rolltec Plus G/S 500 features
two additional useful functions:
1. Broken glass indicator (G)
The function "broken glass indicator" is only activated in the auto-
matic operation.
2. Sun protection (S)
The function "sun protection" can only be operated in the automatic
operation within the previously programmed up and down times.
Note: Standard length of the sun sensor cable
Standard length of the broken glass indicator cable – 1.0 m
Cables of up to 10 m length can be delivered for both functions.
- 62 -
G

General

– 2.0 m