Week Function; Special Functions; Astro Function / Run Time Correction - Vestamatic Rolltec Plus Montageanleitung Und Bedienungsanleitung

83100311 H1.qxd 20.06.01

Week function

The week function enables you to program a particular up and down
time for each individual day of the week.
In order to activate the week function, all DIP switches in the rear of
the housing must be set according to the table on page 61.
The following times were preset for this operation mode by the manu-
facturer:
· Up time Monday through Friday
· Down time Monday through Friday – 2ß0:0ß0
· Saturday / Sunday – no preset time.
If you wish different up or down
times, perform the following steps:
Press the day button. The display
will show a new day of the week
after every press.
Perform the steps described on page 50 and 51 to program the up
and down times for the currently displayed day.
09:17 Seite 55

Special functions

– 0ß6:0ß0
(QS8:0ß0)
(0w8:0ß0)
... etc.
- 53 -
G
Special functions
The Astro function is basically an electronical calendar. Depending
on the stored sunrise and sunset times, the up or down times are
automatically corrected under consideration of the geographical loca-
tion of your residence. This correction is based on the up or down
times you previously set.
For more information on the programming of the Astro function please
see page 56.
Example:
You have activated the Astro function and previously programmed the
following up and down times according to the instructions on page 50
and page 51:
Up time – 0ß6:3ß0 (½ an hour before sunrise according to
the diagram on page 57)
Down time – 1ß9:3ß0 (½ an hour before sunset according to
the diagram on page 57)
Given the current calendar week 14.
In this example, the roller shutter does not move up at 6: 30, as pro-
grammed but moves up at 7:00 when the sun rises.
In the evening, it moves down at 19 : 30 at the programmed time.
- 54 -
G
Astro function