Vestamatic Rolltec Plus Montageanleitung Und Bedienungsanleitung Seite 21

83100311 H1.qxd 20.06.01
Rolltec Plus G/S 500
Installation and Operating Instructions
09:17 Seite 41
Congratulations for buying the Vestamatic Rolltec Plus G/S 500 roller shutter
control. You have purchased a high-quality product that features many practical pro-
gramming options and has been manufactured according to the highest quality
standards which will guarantee optimum efficiency and reliability. Please take the
time to read these operating instructions carefully before starting up. We have tried
to make sure that all programming instructions are easy to understand.
Safety precautions
· Check the control for any signs of damage immediately after unpacking. Do not
start up the control in case there is any damage. If there is damage due to the
shipping, please notify the supplier immediately.
· Please note that the Vestamatic Rolltec Plus G/S 500 roller shutter control
requires an operating voltage of 230 VW, 50 Hz. Make sure to contact a profes-
sional electrician for the installation as well as for the setting of the DIP switches
on the rear panel of the device.
· The control was designed for correct use as described in the operating instruc-
tions. Any changes or modifications thereof are not permissible and result in loss
of all warranty claims.
· If safe operation of control or roller shutter can not be guaranteed, the control
must be turned off immediately and protected against unintentional operation.The
same applies for work on windows or roller shutters that are operated by this
control.
- 40 -
G