Rail Installation/Water Connection - PHARO 29 450 000 Montageanleitung

R a i l I n s t a l l a t i o n / W a t e r C o n n e c t i o n
1 The rail comprises two almost identical parts.
Difference: Rail (a) has a longer hose.
Install rail (a) on the left side of the Cocoon (view from the
front).
2 Take Bodyvette adapter, Bodyvette body, locking ring and
cover out of package and lay them out for use.
3 Roughen the thread of the body of the Bodyvette body
shower and bind with Teflon tape.
4 Position rail on the left side of the Cocoon and lead hose
through the side opening of the central connection unit.
5 Plug adapter from the inside to the body pieces.
6 Screw body from the inside into the rail, tighten with fork
wrench SW32.
7 Screw panel on thread of body.
8 Plug on shower head, secure with locking washer:
Point the flat side of the locking washer towards the shower
head and then press it until it locks in. Clip in cover panel.
9 Perform the same steps with rail b.
63