Inner Arch Piece Installation - PHARO 29 450 000 Montageanleitung

I n n e r A r c h P i e c e I n s t a l l a t i o n

Inner Arch Piece Installation

1 Lead inner arch piece inside the Cocoon to the body
piece roof/outer arch piece.
The front part of the inner arch piece must be located
above the level of the panel fitted on the front of the outer
arch piece in the previous step:
2 Press overhead shower hose in both right hose guides of
clamp clips (d) and (e).
3 Push inner arch piece forwards in panel direction. Reach
behind the overhead shower with one hand and press it in
panel direction until the inner arch piece touches the panel.
4 Screw the inner arch piece tight from the front to the rear with
screws 4.8 x 32 – do not screw in the last screw at
clamp clip f yet.
Level of the Panel
Clamp clip (d)
Clamp clip (e)
b e
h i n
d
Light connections
Overhead shower connection
No gap
may be visible here
(view from inside the Cocoon towards
the panel – inner arch piece connection).
f r o
n t
61