Assembly Procedures - Vevor Rc-1803J Bedienungsanleitung

1. Assembly Procedures

1
Assemble parts Cx2, D, Kx2, Mx4, Ox2, and Qx2 as shown in the figure, and
tighten all nuts using the 17mm wrench tool.
Note: After the safety pin of K is threaded into the pin hole, the safety buckle
needs to be fastened.
2
Install part B, as shown in the figure, into the assembly in step 1, assemble parts
Mx4, Ox2, and Qx2, and tighten all nuts using the 17mm wrench tool.
- 9 -