VEVOR RC-1803J Bedienungsanleitung Seite 11

3
Assemble parts Ex2, Fx2,, Lx4 Nx4, Px4, and Sx8 as
Take parts Ex2, Fx2, Lx4, Nx4, Px4, Rx4, and ABx8 for
shown in the figure,. Pay attention to the direction of the
E/F components during assembly, and do not tighten
the knob L after assembly to ensure that the E/F
components can move and adjust the position on the
horizontal pipe.
4
Take parts A, O, Mx2, and Q and assemble them on the assembly in step 3, as
shown in the figure. After tightening nut O, loosen it by half a turn and fix it with a
K pin.
- 10 -