VEVOR RC-1803J Bedienungsanleitung Seite 13

7
After completing step 6, take the M, W, X, Y, and Z accessories as shown in the
figure for clearance assembly, ensuring that the Z parts are tightened with a
wrench tool.
8
Roughly adjust the distance between the E and F wheel frames according to the
actual wheel base of the front and rear wheels of the bicycle. First, place the
bicycle on the inner side of the frame as shown in the figure, and fix the H hook
onto the crossbeam of the bicycle. Fine adjust the distance between E and F so
that the wheels just fall into the wheel frame, and tighten the locking knobs on E, F,
and H.
- 12 -