Manual settings
Select Cable (Ethernet) or Wireless (WiFi) and set the respective DHCP function
to On or Off.
NetRemote PIN-Setup
You can change the four digit code for your Internet radio with this setting.
Network profile
The device stores the last 4 WiFi networks to which a connection was established.
Select a network and press OK. Confirm the subsequent prompt with yes to de-
lete the network from the list.
NOTE!
The currently connected network cannot be deleted.
Keep network connected
Select this entry and set the function to yes if you want the Internet radio to
maintain the network connection even when in standby mode or when us-
ing operating modes that do not require WiFi (AUX IN). Other media players can
then access the Internet radio and "wake it up".
If the network connection is not to be maintained, set the function to no. In this
setting, the WiFi function will also be switched off for operating modes which
do not use WiFi (AUX IN). It will not be possible to control the device using the
Lifestream IR app in this case.
NOTE!
Please note that when a network connection is maintained in stand-
by (setting yes), the Internet radio will consume more power in standby
mode than indicated in the technical data.
17.3. Time/Date
Set the time and date here as described in the section 'Using the device for the first
time' .
17.4. Language
You can set the menu language here.
DE
EN
TR
85