Parts List; Instructions For Use - Create Spice Grinder Studio Pro Bedienungsanleitung

1
2
1. Indicator light
2. Start/Stop Button
3. Charging port
Before first use, remove and dispose of all packaging materials
properly and inspect the product for any possible damage. Do
not use the appliance if it is visibly damaged, contact after-sales
service.
• Before using for the first time, fully charge the appliance.
• Connect one end of the USB cable to a power source, and insert
the other end of the USB-C cable horizontally into the charging
port opening on the back of the grinder.
• When the device starts charging, the white indicator light will
start flashing. Charging takes approximately 2 to 4 hours.
When the white indicator stops flashing, it will indicate the end
of charging.
• Charge the device only when necessary to avoid damage and
unnecessary energy consumption.
• Unscrew the spice container and add the spices (sea salt, pep-
per and other spices with a diameter less than 5 mm).
• Fill the spice bin approximately 2/3 full.
• Screw the spice container cap clockwise.
• Align the grinder with the spice bin to be used and press to lock.
• The process for replacing the spice bin is the same as the
installation process. Pull the spice bin to unlock.
8
E NG L I SH

PARTS LIST

INSTRUCTIONS FOR USE

3
4. USB-C type cable
5. Spice Depot (x2)
6. Storage base
4
5
6