VEVOR RC-1803I Originalanleitung Seite 7

This product is designed such that, with proper assembly, mounting and

operation cause no damage to the vehicle.
Do not over-tighten the fasteners.

This product is designed to be fitted directly on a vehicle and has a 2-inch size

hitch.
This product is not designed to resist extreme weather conditions, especially

seacoast air.
NOTICE
Check the clearance. It is the responsibility of the driver to ensure there is

sufficient clearance. This is dependent on the vehicle, the load, and the road.
Clearance should allow for the distance away from the rear wheels and the
movements imposed by driveway ramps and speed bumps. It should be
between 12" and 15" (30 and 38 cm).
Do not use this product for purposes other than carrying bicycles. Do not

modify any components of the product.
Do not exceed the maximum load capacity, or carry more bicycles than

recommended for each model.
Always use the safety strap to attach the bicycles to this product. Replace any

safety strap at the first sign of wear.
Ensure there is a safe distance between the bicycles and the ground,

especially when entering a driveway. This product is for carrying standard-bike
frames. Do not transport tandem or recumbent bicycles.
Do not transport bicycles with attachments such as baby seats, panniers,

wheel covers, full bicycle covers, or motors.
All loose or removable parts and accessories of bicycles (e.g.toolbars, baby

carriers, pumps, etc.) must be removed before loading onto this product.
Do not let children climb on or play with the product.

For fuel economy and the safety of other road users, this product must be

dismantled from the vehicle when not in use.
Keep a safe distance between the exhaust pipe and the bicycle(s) so that the

exhaust heat cannot affect the bicycle(s) or the straps. Make sure bike tires are
- 6 -