VEVOR RC-1803I Originalanleitung Seite 12

5
Take parts A, L, ABx2, T, O and assemble them on the assembly in step 4, as
shown in the figure. After tightening the nut O, fix it with an L pin.
6
Take parts G, H, ADx2, Nx2, Px2, Rx2, ACx4 and assemble them on the
assembly in step 5, as shown in the figure. Do not tighten the knob AD to ensure
that the G/H component can move up and down on the vertical pipe to adjust its
position.
- 11 -