VEVOR RC-1803I Originalanleitung Seite 16

13
After opening the safety pin on the rack, as shown in the figure, flip the frame
backwards to the stop, and the trunk door of the car can be opened smoothly.
14
When the bicycle is temporarily not attached to the frame, the W pin on the frame
can be pulled out, and the D vertical pipe can be rotated as shown in the figure to
align with the rear hole, and then the W pin can be inserted as shown in the figure.
Pull out the L safety pin again and rotate the B crossbeam upwards until the two
holes are aligned. At this point, insert the L safety pin and fasten the safety buckle
as shown in the figure
- 15 -