Retevis RT86S Bedienungsanleitung Seite 7

4.CTCSS/DCS
CTCSS/DCS is OFF or 67-754I optional. The channels set to the CTCSS/DCS must match the correct CTCSS/DCS to achieve communica-
tion.
a.Press the [MENU] key to enter the menu, and press the[•] or[•] key to choose CTCSS/DCS.
b.Press the [MENU] key to enter the next-level menu.
c.Press the [•] or [•] key to choose the needed OFF or 67-754I CTCSS/DCS. Long press the[•] or [•] key to switch quickly.
d.Press the [MENU] key to confirm and save.
5.Keypad Tone
Beep is the power-on and key prompt sound. Beep has ON or OFF.
a.Press the [MENU] key to enter the menu, and press the [•] or [•] key to choose Keypad Tone.
b.Press the [MENU] key to enter the next-level menu.
c.Press the [•] or [•] key to choose the needed OFF or ON.
d.Press the [MENU] key to confirm and save.
6.Voice
Voice prompt setting has OFF or ON.
a.Press the [MENU] key to enter the menu, and press the[•] or [•] key to choose Voice.
b.Press the [MENU] key to enter the next-level menu.
c.Press the [•] or [•] key to choose the needed OFF or ON.
d.Press the [MENU] key to confirm and save.
7.SQL
The squelch level is 0-9 optional. The level 0 is always on, the level 1 is the lowest, and the level 9 is the highest.
a.Press the [MENU] key to enter the menu, and press the [•] or [•] key to choose SQL.
b.Press the [MENU] key to enter the next-level menu.
c.Press the [•] or [•] key to choose the needed 0-9 levels.
d.Press the [MENU] key to confirm and save.
8.Back Light
The back light setting is ON or optional 1-20, 60, 120s.
a.Press the [MENU]key to enter the menu, and press the [•] or[•] key to choose Back Light.
b.Press the[MENU]key to enter the next-level menu.
c.Press the [•] or [•] key to choose the needed ON or 1-20, 60, 120s.
d.Press the[MENU] key to confirm and save.
9.Talk Around
After turning on the function, the transmit frequency will change to be the same as the receive frequency, and they communicate
directly without using the repeater. After turning it off, the transmit and the receive frequency are different. OFF or ON is optional.
a.Press the [MENU] key to enter the menu, and press the [•] or [•] key to choose Talk Around.
b.Press the [MENU] key to enter the next-level menu.
c.Press the [•] or [•] key to choose the needed OFF or ON.
d.Press the [MENU] key to confirm and save.
10.Mic Gain
Mic gain is optional: -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5.
a.Press the [MENU] key to enter the menu, and press the [•] or [•] key to choose Mic Gain.
b.Press the [MENU] key to enter the next-level menu.
c.Press the [•] or [•] key to choose the needed -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5.
d.Press the [MENU] key to confirm and save.
11.Roger
After turning on, release the [PTT] key, the radio sends a beep sound.
a.Press the [MENU] key to enter the menu, and press the [•] or [•] key to choose Roger.
b.Press the [MENU] key to enter the next-level menu.
c.Press the [•] or [•] key to choose the needed OFF or ON.
d.Press the [MENU] key to confirm and save.
12.SCR
This function is similar to voice encryption. Different RT86S radios need turn ON simultaneously, or OFF simultaneously for clear
hearing.
a.Press the [MENU] key to enter the menu, and press the [•] or [•] key to choose SCR.
b.Press the [MENU] key to enter the next-level menu.
c.Press the [•] or [•] key to choose the needed OFF or ON.
d.Press the [MENU] key to confirm and save.
13.RESET
Reset the radio to the factory original setting.
a.Press the [MENU] key to enter the menu, and press the [•] or [•] key to choose RESET.
b.Press the[MENU]key to pop Sure to Reset.
c.Press the[MENU]key to confirm reset.
d.Press the[EXIT]key to cancel reset.
04