Setting The Coffee Programme (Programming The Filling Quantity) - Electrolux ECG 6600 Gebrauchsanweisung

822_949_354 ECG6600_Elux.book Seite 128 Donnerstag, 23. August 2007 7:58 19
g
You can change these settings as fol-
lows:
0 Press the "MENU" button (Figure 5).
The menu option «CHOOSE LAN-
GUAGE» appears.
0 Press the scrolling buttons "<" or ">"
(Figure 6) until the menu option «JUG
PROGRAM» appears.
0 Confirm the menu option with the
"OK" button (Figure 6). The display
shows «JUG COFFEE TASTE».
0 Confirm the menu option with the
"OK" button (Figure 6). The display
shows the current setting, e.g.
«EXTRA-MILD JUG».
0 If necessary select a different coffee
strength in 5 steps from extra mild to
extra strong using the scrolling buttons
"<" or ">" (Figure 6).
0 When the desired coffee strength is
displayed, confirm it with the"OK" but-
ton (Figure 6). This coffee strength is
programmed in accordingly.
If "OK" is not pressed, the appliance
automatically returns to the coffee
mode after about 120 seconds without
saving the entries.
The display automatically jumps back
3
to the menu option «JUG COFFEE
TASTE» after programming.
0 If you want to change and save the
filling quantity for the jug, press
thescrolling button ">" (Figure 5) until
the menu option «JUG OR CUP
LEVEL» appears.
0 Confirm the menu option with the
"OK" button (Figure 6).
0 A bar appears on the display, which can
be made bigger or smaller; this repre-
sents the cup filling quantity. If neces-
sary a different filling quantity can be
selected using the scrolling buttons "<"
or ">" (Figure 5) in 10 steps.
3 When the bar if completely full, this
represents the max. cup filling quantity
for the jug programme of about
125 ml.
128
0 When the desired filling quantity is
displayed, confirm itwith the"OK" but-
ton (Figure 6). This filling quantity is
now programmed in.
If "OK" is not pressed, the appliance
automatically returns to the coffee
mode after about 120 seconds without
saving the entries.
The display automatically jumps back
3
to the menu option «JUG OR CUP
LEVEL» after programming.
0 To go back to the coffee mode, press
the "MENU" button (Figure 5) twice or
wait about 120 seconds until the
appliance automatically jumps back to
coffee mode.
13.5 Setting the coffee programme
(programming the filling
quantity)
The appliance is preset to normal
quantities at the factory. You can
change and save these quantities for
every cup size to suit your taste.
You can change the filling quantity for
each of the five cup sizes
«ESPRESSO CUP», «SMALL CUP»,
«MEDIUM CUP», «LARGE CUP»,
«MUG»:
0 Press the "MENU" button (Figure 5).
The menu option «CHOOSE LAN-
GUAGE» appears.
0 Press the scrolling buttons "<" or ">"
(Figure 6) until the menu option
«COFFEE PROGRAM» appears.
0 Confirm the menu option with the
"OK" button (Figure 6). The display
shows «ESPRESSO CUP».
0 If necessary, select another cup size
with the scrolling buttons "<" or ">"
(Figure 6).
0 When the desired cup size is displayed,
confirm it with the"OK" button (Figure
6).
0 A bar appears on the display, which can
be made bigger or smaller; this repre-
sents the cup filling quantity. If neces-
sary a different filling quantity can be