Herunterladen Inhalt Inhalt Diese Seite drucken

Landing; Aerobatic Flight - HobbyZone Mini Super Cub Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Landing

When you notice that your Mini Super Cub no longer climbs well under full power, normally after 6–8 minutes, the battery
is getting low and it is time to land. Line the airplane up directly into the wind toward the desired landing spot. At about
10–15 feet of altitude, reduce the throttle gradually until it is completely off. Your Mini Super Cub will glide in for a landing.
Auto Cutoff: When the battery gets low enough, this feature will automatically shut off the motor and save enough
battery power to maintain control of the tail so you can land correctly and safely. If the motor cuts off, prepare to land
immediately.
WaRNINg: Do not attempt to catch the airplane
or injury may result. Turn the motor off prior to
touchdown in order to prevent damage to the propeller.

Aerobatic Flight

It is recommended earlier in this instruction manual that the Mini Super Cub controls be set for softer responses in the
outer holes of the control surfaces. Once you get used to the flight characteristics and want to perform more aerobatic
maneuvers (with ACT off), you can change the amount of throw that is permitted by moving the clevises to the inner holes
of the control horns. After making any adjustments, always turn on the transmitter, center the control surface trims and
make sure the control surfaces are even. Make the proper adjustments to make the surfaces even, if they are not.
Note: By making these changes, the controls will be
much more responsive. This makes the airplane much
less forgiving and it will be easier to stall. Remember,
crash damage is not covered under the warranty.
Expert Tip: As you get more experienced at flying, try
adding a bit of UP elevator (pull back on the elevator
stick) just before touchdown to "flare" the plane. With
some practice, your landings will be smooth and on
target.
EN
25

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hbz4800euHbz4800uk

Inhaltsverzeichnis