VEVOR PAC11 Benutzerhandbuch Seite 9

8
Place the weight "F" at the end of the first tube section,
and connect the tube assembly to the cleaner.
11
Adjust your filtration system to the vacuum setting. A pump
of at least 3/4 horsepower (6.5 m³/h) is required. Water flow
don't be larger than 12 m³/h.
9
Fill the tube sections with
water to eliminate the air
pockets.
13
12
Turn on the pump and
relax as your cleaner
cleans your pool.
- 8 -
10
If your regulator is connected to a wall skimmer, pass the
hose through the front of your skimmer and connect it to
the elbow connector.
14
If the cleaner leans too far forward
You can adjust the
power of your cleaner or backwards during operation, this
by turning the knob of can be corrected by moving the
the regulator "I" as weight "F" along the tube section
shown. as shown in the drawing.