VEVOR PAC11 Benutzerhandbuch Seite 15

5.Problem: Cleaner climbs out of the pool and draws in air.
Solution:
● Ensure there is a valve installed in the skimmer/weir.
● Inspect the Regulator Valve and flush away any debris build-up.
● Verify proper hose length.
● Ensure cleaner sits flush with the pool floor. Adjust the position of the hose weight if necessary. This should be
done at the deepest part of the pool.
6.Problem: Cleaner hose is tangling.
Solution:
● Ensure the wheel on top of the Cleaner body is rotating freely and is screwed on securely.
● Check that the hose sections are straight; if not, lay the hose in a straight line in the sun to relax the memory.
● There may be too many hose sections for your pool. Try removing a section.
● Inspect the Regulator Valve and flush away any debris build-up.
7.Problem: Cleaner won't leave the edge or rim of the pool.
Solution:
● Utilize return jets to move cleaner.
● Adjust hose weight.
● Try decreasing the flow to your cleaner via the regulator. Less suction will allow the cleaner to move more
freely.
- 14 -