VEVOR PAC11 Benutzerhandbuch Seite 17

● Ensure the cleaner sits flush with the pool floor. Adjust the position of the hose weight if necessary. This
should be done at the deepest part of the pool.
11.Problem: Air bubbles are noticeable in the return jets.
Solution:
● Ensure the cleaner hose is assembled tightly.
● Ensure the cleaner head is not removed from the water while the pump is running.
● Ensure the hoses are not damaged.
● Ensure the regulator valve is under water.
12X80CM
1700gal/h or 6.5m³/h
(MIN 0.75HP)
- 16 -