Hama RC 40 Bedienungsanleitung Seite 6

press MODE to select date, the date digits flash
Press "+" or " " to set date
Press MODE to select hour, the hour digits flash.
Press "+" or " "to sethour.
Press MODE to select minute, the minute digits flash.
Press "+" or " "to setminute
Press MODE to return to normal time display.
Select 12 hour or 24 hour display format
Press "+" will toggle the display format between 12 hour and 24 hour
Note
1. Manual setting is merely available when the radio signal cannot be received
Manual setting can be activated by hold MODE button, whenever the radio signal is not
received
2. Fast advance can be activated by pressing "+" or
modes
Calendar Display
Press CALENDAR for calendar display, and it wil return to normal time display after 5 seconds
automatically.
Alarm Function
For alarm time setting, press MODE for 3 seconds to set hour. The hour digits flash. Press "+" or
" " to set Press MODEt0 set minute. The minute digit flash. Press "+" or
MODE to return to normal time display. Press MODE for alarm time display, and it will return to
normal time display after 5seconds automatically.
Press ALARM ON/OFFto enable or disable the alarm function. The alarm indicator lights up
when alarm is on When alarm is on, it can be stopped by pressing the ALARM ON/OFFor
LIGHT/SNOOZEof the clock. If
repeat alarm indicator will flash, and it will repeat the alarm after 4 minutes
NOTE:
When alarm is on and no button is pressed to Stop it, it wil Stop after 10 minutes
6
13936man_de_en_fr_it_nI_pI
is stopped by pressing the LIGHT/SNOOZEof the clock, the
ru.indd 6
8:00
for 2 seconds in any one of the setting
to set Then, press
09 01.15 1210