EFOY ProCube Bedlenungsanleitung Seite 25

5. Installation
(4) Connect solar array (optional)
Connect the wires leading to the solar array with
correct polarity.
Notes:
 It is recommended to adjust the switching
thresholds of the EFOY Pro for automatic battery
charging when operated in combination with solar.
The fuel cell should in that case only switch on if
solar alone can not provide enough energy to supply
the load (e.g. in winter times).
 Place the positive and negative wire close to each
other to minimize electromagnetic effects.
 If any grounding is required, always do this on the
negative wires.
(5) Fasten the strain relieves and close the terminal lid
again.
25