EFOY ProCube Bedlenungsanleitung Seite 11

3. Operation
Automatic operation
As soon as you connect the unit to the battery and after
every reset the unit will start the automatic operation
mode.
The unit monitors the battery voltage and starts
charging as soon as the battery voltage drops bellow a
defined threshold. It will stop charging as soon as the
battery voltage exceeds the defined switch off
threshold.
The thresholds for automatic charging can be modified
with a computer – see Computer Interface Adapter user
manual.
Switching On manually
Press on the control panel once if the unit has been
switched off, and twice if it is operating in automatic
mode. The unit will start up regardless of the battery
voltage and will continue charging until it reaches the
switch-off point.
The device will then switch to automatic mode by itself.
This function is only possible when the battery voltage
is below 13.2V.
Switching Off manually
Press on the remote control to switch off the device.
Please note that the fuel cell will not charge the
battery automatically if it is switched off. The unit
needs to be switched on manually and can only start
up if it is connected to an intact battery.
11