Use; Dab Mode - Thomson Rt400Dabbt Bedienungsanleitung

Use

DAB MODE

• Press "
the "MENU" button to access the DAB settings.
Full Scan
• In the <Full scan> screen, press the "
All the stations received are saved in the DAB program list in alphabetical order with short
labels. (If the DAB program list is empty, the DAB mode will always be displayed in DAB
menu mode.)
NOTE: In DAB mode, you can also long press "
rotate "
Manual Tune
• In the <Manual Tune> screen, press the "
Tune" settings.
• Rotate "
confirm and press "MENU" to return.
DRC
• Select "DRC" Settings to access the DAB Dynamic Range settings, which has three
levels of selection: off, low, high. Rotate "
"
upper right corner.)
Prune
• Select the "Prune" settings, selecting "YES" will clear invalid programs in the DAB list.
(Note: Invalid programs are the ones with no stations or weak radio signals on the local
reception frequency.)
FM MODE
• Press "
the "MENU" button to access FM settings.
Scan Settings
• In the <Scan Settings> screen, press "
• Rotate "
press "
a "*")
AUTO SCAN & STORED STATIONS
Auto Scan
• In the FM mode, long press the "
will start scanning for stations automatically. When the radio receives a station signal, it
will automatically save the frequency as a preset station (P01-30).
" to switch to DAB mode after you turn on the radio, and then long press
" to select.
" to select the band. Then press "
" to confirm. (Note: The selected item is marked with an "*" in the
" to switch to FM mode after you turn on the radio, and then long press
" to select <All stations> or <Strong stations only>, and then
" to save the settings. (The selected one will be marked with
" button for 2 seconds and the radio
- EN 21 -
" button to scan all frequencies.
" to full scan. Then
" button to enter the "Manual
" to select and press
" to access Scan settings.
" to