Grill Function - Opera Nivel 930 Benutzerhandbuch

4.28 GRILL FUNCTION

The Grill function is intended for the usage of a grill plate. It provides 9 different grill levels
with a different power output compared to the normal cooking levels. Because of the size of
the used grill plates, the bridge function is automatically activated when the Grill function is
started.
To use the grill function with the grill plate, follow these steps:
1. Turn on the cooktop and place the grill
plate on the correct cooking zone.
2. Use the front power setting display (as a
button) to select the cooking zone. The
standby indicator for the selected cooking
zone will light up.
3. Press the Grill button to activate the
function. The front and rear cooking zones
will switch together to operate.
4. Select the desired cooking level using the
slider area: Level 1-3 for vegetables; Level
4-6 for fish; Level 7-9 for meat.
5. To deactivate the grill function, press the
Grill or ON/OFF button.
NOTE
Never use the appliance unattended.
WARNING
Use the Gril function with a grill plate suitable for induction
4.31 MANUAL/AUTOMATIC FAN
By default the fan is set in automatic mode, so the fan speed is regulated automatically
following the cooking zone with the highest power currently active.
Activating the manual mode:
1. With the hob switched on, select the fan power setting display and then choose the
desired fan speed on the slider area sensor field from 0 (fan switched off) to P.
Activating the automatic mode:
1. Press and hold the fan power setting display for 3 seconds to activate the automatic
mode. "A" is displayed on the fan power setting display.
NOTE
• In automatic mode, increasing the power of a cooking zone will cause an
automatic increase of the fan speed; decreasing the power of a cooking zone will
cause an automatic decrease of the fan speed.
56 | ASPIRATION HOB
1.
2.
3.
4.
0 1 2 3 4 5 6 7 8 9 P
5.