Control Panel - Homcom 821-047V91 Bedienungsanleitung

EN
5. OPERATION

5.1 CONTROL PANEL

Press the STAND-BY button to turn on the machine, the running indicator
lights up and the default fan speed is high, and the default humidity setting is
50%. When the machine is running, press the power button to turn off, the
Power
running indicator light goes off and the compressor stops immediately, and
then the fan will shut down after 30 seconds delay.
Press the mode button to switch between Auto and Continuously dehumidify
mode.
Auto mode - continuously dehumidify mode cycle, press once to switch the
Mode
mode from one to another, the corresponding indicator will light up.
button
• Auto mode: when environmental humidity ≥ set humidity +3%, the fan
starts working and compressor starts working after 3 seconds. When
environmental humidity ≤ set humidity -3%, the compressor stops working
and fan stops working after 30 seconds' delay.
Both fan speed and humidity setting can be adjusted under Auto mode.
• Continuously drying mode: In this mode, the machine will continue to run
in high fan speed , fan speed is adjustable, humidity setting can not be
adjusted.
• Sleeping mode: In sleep mode , the target humidity is 60%, and after no
operation for 10 seconds, except sleeping mode indicator light , power
indicator light and child lock indicator light will dark, other the indicator
lights and display screen will be off .
When room humidity ≤ 57%RH，the compressor & fan will stop working .
When room humidity ≥ 63%RH，the fan&compressor will start working .
In sleeping mode, when the water tank is full , the machine will not alarm ,
but the water tank full indicator light will be on (red color) to remind that the
water tank is full and you need to empty the water tank.
9