HOMCOM 821-047V91 Bedienungsanleitung Seite 11

EN
Press the timing key to set timing / check timing / cancel timing
a) In the non timing state: press the timing key to enter the timing setting
state. The digital screen flashes to display the timing time. During the
Timer
flashing period of the digital screen, press the adjustment key to adjust
button
the timing time (0 ~ 24h).
b) In the timing state: press the timing key, and the digital screen flashes to
display the remaining timing time. Press the timing key again during the
flashing period of the digital screen to cancel the timing.
Press this button to switch the fan speed between high and low fan speed
cycle, and the corresponding indicator light will be on .
Fan
The fan speed can be adjusted only in Auto mode.
Speed
button
Press this button to set the humidity (30-80%) or timing time (1-24h)
To humidity adjusting,press one time to add 5%humidity value,the humidity
adjusting follow the order as below:30%-35%-40%-45%-50%-55%-60%-
Set
65%-70%-75%-80%-30%cycle
button
To timing,press one time to add 1 hours timing value,the timing follow the
order as below:00-01-02-03-04-05-06-07-08-09-10-11-12-13-14-15-16-17-
18-19-20-21-22-23-24-00 cycle
Press and hold this button for 3 seconds to open the lock function ,the
indicator light will be on and you can not operate other buttons except this
one . Press and hold this button for 3 seconds again to close the lock
Child-
function ,the indicator light will be off.
Lock
3 Color Digital Display:
Ambient Humidity≤45%, The light show Blue
45<Ambient Humiditys<65% , The light show Green
Ambient Humidity≥65% , The light show Red
10