Werbung
EN
5. OPERATION
5.1 CONTROL PANEL
After switching on the power, all the indicators and the screen will be on for 1
second and then off.
After a buzzer, the power indicator will be on and the machine will be in
standby mode.
Press this button, the machine starts to run, the machine initial humidity is
60%RH, default automatic mode and high wind operation.
Press this key again, the machine will stop running, and the fan will be
closed.
Auto mode - continuously drying mode-sleeping mode cycle, press once to
switch the mode from one to another, the corresponding indicator lights up.
• Auto mode: when environmental humidity ≥ set humidity +3%, the fan
starts working and compressor starts working after 3 seconds.
When environmental humidity ≤ set humidity -3%, the compressor stops
working and the fan delay shutdown.
Both fan speed and humidity can be adjusted under auto mode.
• Continuously drying mode: The machine continues to run, but the
humidity can not be adjusted.
• Sleeping mode: Touch the sleep button, the button lights up and start the
sleep function. After no operation in 10 seconds, all indicators turns dark
gradually and the wind speed is automatically switched from high to low.
Touch any button to wake up the indicator. Touch sleep button again to exit
the sleep mode.
In sleep mode , the fault. code is not displayed, the wind speed is not
adjustable, and the humidity is adjustable.
Werbung
