Visual warning lights
Error
Error description
code
E1
Battery pack under voltage
E2
Battery pack over voltage
E3
Over/lower temperature
E4
Over load
E5
Short circuit protection
E6
Locked rotor
E7
System error
58
Art. 630
Battery Blower 21 V
Solution
1. Charge the battery pack
1. Replace the battery pack that fits the product
1. If over-temperature protection, let the machine
cool down and start again.
2. If low-temperature protection, move the machine
to higher temperature environment for use
Reduce the load and reset the switch
Temporarily abnormal load, or PCB error.release the
switch and start again.
If E5 happens frequently at no load running, Allow an
authorized service centre to examine the machine.
Low down the load, clean the machine and restart.
Motor wire broke, wrong PCB, or software error.
release the switch and start again.
If E9 happens frequently, Allow an authorized service
centre to examine the machine.
Art. 630
Battery Blower 21 V
Usage
Where to store the blower
Storage
The most important thing to keep in mind before storing your blower is to make sure that the
battery is fully charged and the power is off.
1.
Make sure that the battery is fully charged.
2.
Make sure that the power is off.
3.
Store the blower in a cool and dry environment with a room temperature from ranging
between 15° and 35° C.
4.
If the blower will not be used for a long time, charge the battery at least once every six
months.
5.
The blower and the battery charger must be stored safely, protected from heat, dust and
moisture.
6.
The blower and flammable substances must be kept at least 1.5 meters apart.
7.
Do not turn on the power switch during storage.
For further information about the product, please contact info@stockergarden.com.
59