4. Unscrew the middle hinge. Then lift the lower door and place it on a soft pad to
avoid any scratches.
5. Move the hinge hole coversfrom the left side to the right side.
6. Unscrew the bottom hinge. Then remove the adjustable feet from both sides.
Note:
remove
if present.
7. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
unscrew
v.l.o
this screw
screw
screw
8
8. Refit the bracket fitting to the bottom hinge pin. Replaceboth adjustable feet.
Transfer the lower door to the proper position.
9. Reversethe direction of the middle hinge by 1800, then transfer it to the left
position. Fit the middle hinge pin in the upper hole of the lower door, then tighten
the bolts.
10. Placethe upper door back on. Ensure the door is aligned horizontally and vertically
so that the seals are closed on all sides before finally tightening the top hinge. Then
insert the hinge and screw it to the top of the unit.
9
v.l.o