Listo RDL165-55hos1 Bedienungsanleitung Seite 4

II. Remettez en place Ie capot supérieur et revissez-le.
12. Détachezlesjoints des portes du réfrigérateur et du congélateur,faites-les pivoter,
puis fixez-les ä nouveau.
v.l.o 6
DOOR REVERSAL
Tools required: Cross-headed screwdriver, Flat bladed screwdriver, Hexagonal
spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, you need to tilt the unit backwards.You should rest the unit on
something solid so that it doesn't slip during the door reversing process.
• All parts removed must be saved to reinstall the door.
• Do not lay the unit fiat, asthis may damagethe coolant system.
• It's best if there are 2 people to handlethe unit during assembly.
1. Remove the four screws in the top cover and then lift it off.
2. Unscrew the top hinge then remove the upper door and place it on a soft pad to
avoid any scratches.
3. Remove the pin with a screwdriver and flip the hinge bracket. Then refit the pin to
the hinge bracket.
PROCEDURE
unscrew
7 v.l.o