Dell PowerVault NX1950 Handbuch Seite 11

16 In the Completing Windows Server 2003 R2 Setup window, click Finish.
17 When prompted, click Yes to restart your system.
18 When prompted, log in to your system as Administrator.
The Windows Storage Server 2003 R2 script runs and the Windows
Unified Data Storage Server 2003 R2 x64, Enterprise Edition
components are installed and configured on your PowerVault NX1950
storage system.
NOTE:
19 When prompted, log in to your system as Administrator.
20 In the Windows Server Post-Setup Security Updates window, click Finish.
The Dell PowerVault NX1950 Storage Initialization Wizard window
appears. Exit from this window.
21 Install the following components from D:\, where D:\ is the DVD drive.
• D:\cmpnents\feature_packs
• Iscsitarget.exe
• WindowsServer2003-KB919455-x64-enu.exe
• WindowsServer2003-KB919458-x64-enu.exe
• D:\cmpnents\R2\PACKAGES\VDS11\UPDATES
• Update.exe
NOTE:
22 When prompted, log in to your system as Administrator.
The Windows Storage Server 2003 R2 script runs and the Windows
Storage Server 2003 R2 x64 Edition components are installed and
configured on your storage server.
NOTE:
23 When prompted, log in to your system as Administrator.
24 Remove the Microsoft Windows Unified Data Storage Server 2003 DVD
from the DVD drive.
This procedure may take several minutes to complete.
You must reboot the system after installing these files.
This procedure may take several minutes to complete.
Upgrading Your Operating System
9