Upgrading The Dell|Emc San Gateway Solution Software Components; Setting Up A Cluster Configuration - Dell PowerVault NX1950 Handbuch

Upgrading the Dell|EMC SAN Gateway
Solution Software Components
To enable the Dell|EMC SAN Gateway solution as a cluster, you must
update the operating system to Windows Unified Data Storage Server 2003,
Enterprise Edition. Along with updating the operating system, you must
perform the following:
1 Log in as administrator. Exit from the Dell Storage Initialization
wizard, PowerVault NX1950 Configuration Tasks wizard, and
PowerVault NX1950 Management Console.
2 Download and run the following utilities located on the Dell Support
website at support.dell.com:
Dell Storage Initialization wizard
a
NOTE:
select Repair.
Dell PowerVault NX1950 Firewall Script Batch File - Gateway
b
Enterprise
NOTE:

Setting Up a Cluster Configuration

For information on setting up a cluster, see the Dell PowerVault NX1950
Cluster Systems Installation and Troubleshooting Guide.
18
Upgrading Your Operating System
When you are prompted to select either Repair or Remove,
Verify that the firewall in turned on.