Updating Firewall Ports; Updating The Dell Storage Initialization Wizard - Dell PowerVault NX1950 Handbuch

Updating Firewall Ports

The firewall port exceptions must be updated from those set in Windows
Unified Data Storage Server 2003, Standard Edition to allow cluster
support. Dell has created a script to set the necessary port exceptions
to enable a cluster environment.
To download the latest script, from the Dell Support website perform
the following steps:
1 Download the Dell PowerVault NX1950 Firewall script batch file
from the Dell Support website at support.dell.com.
2 Run the DSIW-Firewall-xx.yy.zz.bat file,
where xx.yy.zz is the version number.

Updating the Dell Storage Initialization Wizard

The Dell Storage Initialization wizard automates the configuration of
the PowerVault MD3000 storage array and is a critical component of the
PowerVault NX1950 solution. You can download the latest Dell Storage
Initialization wizard from the Dell Support website at support.dell.com.
To update the Dell Storage Initialization wizard from the Dell Support
website, perform the following steps:
1 Open a browser and go to support.dell.com.
2 Click Drivers and Downloads.
3 From the drop-down menu, select the Product Type as PowerVault
and Product Model as NX1950 and click Go.
4 Select the operating system and click Find Downloads.
5 Download the Dell Storage Initialization wizard to a removable disk.
6 Insert the removable disk into the PowerVault NX1950 system and run
the file PVNX1950.msi.
7 Select Close.
8 Reboot your PowerVault NX1950 system.
Your PowerVault NX1950 system is now fully upgraded to Windows
Unified Data Storage Server 2003, Enterprise Edition along with
the required Dell solution software components.
Upgrading Your Operating System
17