Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation of the Touch-Driver under Windows
mouse but if you do not have a PS / 2 mouse you should leave this box
unchecked to avoid compatibility problems.
5.
:We recommend "None" (see the picture upper right) for the
"
Setup Type
"
calibration setting. A calibration will be performed every time your PC starts up
if you choose "Every system boot up". If you choose "Next system boot up" a
calibration will be performed on the next system reboot. You can carry out a
calibration at any time after the TouchKit program is installed. (See "Setting up
the faytech Touch software".) After making your selection on this screen, click
"Next".
6.
"TouchKit - InstallShield Wizard"
"OK". If the "New Hardware Found" dialog of Windows opens, please cancel it.
7.
: If you plan to use multiple monitors, please choose this box.
"Setup Type"
(See "Setting up the faytech Touch software".)
8.
: Accept the default destination or choose your
"Choose Destination Location"
own then press "Next".
: Connect the USB cable now and press
42
faytech Ltd. 2009
C
Installation of the Touch-Driver under Windows
9.
"
": Give the program a name or use the default
Select Program Folder
setting and press "Next".
10."
": The installation will be started automatically with the
Setup Status
selected settings.
11.The installation is successfully completed when the following window appears:
If the USB controller icon is not showing, please disconnect the USB cable from
your PC and connect it again. For more help, Please go to the
"Troubleshooting" section.
43
Werbung
Inhaltsverzeichnis
