Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Display Operation
Settings
l
Reset:
This option will return the display back to the factory settings. All changes
you have made are deleted.
Exit:
l
Return to the main menu or submenu.
Exit
l
To quit the OSD-Menu.
Exit
OSD version 1.1 @2009
40
faytech Ltd. 2009
C
Installation of the Touch-Driver under Windows
(Just for a touch display. You do not have a touch display unless there was a USB cable, a Driver CD
and a touch pen included in the package.)
1. Put the CD into your CD- ROM.
2.If the installation menu does not start automatically, please select the file
setup.htm from the main folder on the CD. Alternatively you can use Explorer
on the CD and select the appropriate subdirectory to open the installation file
setup.exe directly. Now you will see the following window:
Select the Windows driver 2000/XP/Vista/Windows7 in the upper right. If a
security warning pops up, click "Run", "Continue" or "Execute". Under Vista you
must confirm the User Account Control with "Continue". Some further warnings
may be given depending on installed security programs. Always click the
button to continue the operation.
To complete the installation with all default options, click "Next" on each of the
following dialog boxes. You can cancel at any time. To switch back to a
previous step, click the "<back" button.
Please note! The installation process is in English. Later on you can choose the
language for the OSD.
3
."Welcome to the InstallShield Wizard for TouchKit":
continue the installation.It's advisable to close all other programs before
beginning this installation.
4.
"Setup Type":Check the box (see the picture on the next page upper left)
only if you want to install the PS/2-Driver. Usually for a USB-touch display, you
should NOT select this option. The PS/2-Driver works smoothly with a PS / 2
Press "Next" if you to
41
Werbung
Inhaltsverzeichnis
