Faytech 0700 SI/BL Bedienungsanleitung Seite 21

Display Operation
Color settings:
l
NTSC
Auto calibration:
The display is automatically adjusted to the current resolution of your
graphics card. If you are not satisfied with the auto setting, you can optimize
it manually.
Auto color:
This function will optimize the color of the faytech displays. You can always
change the color of the display manually.
Brightness:
This allows you to increase or decrease the brightness of the faytech display.
Contrast:
This allows you to increase or decrease the contrast of your display.
(OSD menu in VGA mode)
50%
50%
(OSD menu in AV mode)
50%
50%
50%
50%
36 faytech Ltd. 2009
C
Display Operation
Color temperature:
You can choose predefined color settings (cool, warm, medium, SRGB) or
make your own color setting (User).
Saturation: (Only in AV mode)
Press VOL+ to increase the color purity (more colorful). Press VOL- to
decrease the color purity (less colorful) .
Hue: (Only in AV mode)
Press VOL+ to move to warmer colors. Press VOL- to move to cooler colors.
Exit:
Return to the main menu or submenu.
.
Picture settings: (not available in AV mode)
l
Horizontal position:
Move the position of the image on the display to the left (VOL-) or the right (VOL +).
Vertical position:
Move the position of the image on the display down (VOL+) or up (VOL- ).
37