Kenwood dpx-7100dab Bedlenungsanleitung Seite 32

TROUBLESHOOTING
Symptom Remedy
Press and hold M to forcibly eject the disc. Be careful not
Disc cannot be ejected.
to drop the disc when it is ejected. If this does not solve
the problem, reset the unit. ( 3)
Noise is generated. Skip to another track or change the disc.
Tracks do not play back as Playback order is determined when files are recorded.
you intended them to play.
"READING" keeps Do not use too many hierarchical levels or folders.
flashing.
Elapsed playing time is This is caused by how the tracks are recorded.
not correct.
"LOADING" appears when This unit is still preparing the iPod/iPhone music list. It
you enter search mode by may take some time to load, try again later.
pressing .
• This unit can only display uppercase letters, numbers,
Correct characters are not
displayed (e.g. album and a limited number of symbols.
• Depending on the display language you have selected
name).
( 5), some characters may not be displayed
correctly.
"NA FILE" Make sure the disc contains supported audio files.
( 31)
"NO DISC" Insert a playable disc into the loading slot.
"TOC ERROR" Make sure the disc is clean and inserted properly.
"PLEASE EJECT" Reset the unit. If this does not solve the problem, consult
your nearest service center.
"NO DEVICE" Connect a USB device, and change the source to USB again.
"COPY PRO" A copy-protected file is played.
28
ENGLISH
Symptom Remedy
"UNSUPPORTED DEVICE" • Check whether the connected device is compatible
with this unit and ensure the file systems are in
supported formats. ( 31)
• Reattach the device.
"UNRESPONSIVE DEVICE" Make sure the device is not malfunction and reattach
the device.
"USB HUB IS NOT This unit cannot support a USB device connected via a
SUPPORTED" USB hub.
• The source does not The USB port is drawing more power than the design
change to "USB" when limit. Turn the power off and unplug the USB device.
you connect a USB Then, turn on the power and reattach the USB device.
device while listening to If this does not solve the problem, turn the power off
another source. and on (or reset the unit) before replacing with another
• "USB ERROR" appears
USB device.
"NO MUSIC" Connect a USB device that contains playable audio files.
"iPod ERROR" • Reconnect the iPod.
• Reset the iPod.
• Sound cannot be heard • Reconnect the Android device.
• If in [HAND MODE], launch any media player
during playback.
• Sound output only from
application on the Android device and start playback.
• If in [HAND MODE], relaunch the current media player
the Android device.
application or use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected
Android device is unable to route the audio signal to
unit. ( 31)