Timago NEURO-TIM Benutzerhandbuch Seite 34

2. Applica�on
The wheelchair is designed for people who have problems with unassisted moving
and for pa�ents with dysfunc�ons and reduced mobility. This self-propelled
wheelchair can also be pushed by an accompanying person. The wheelchair is
suitable for indoor and outdoor use. It is especially recommended to people who
have problems with mobility caused by: paralysis, cerebral palsy, limbs injuries or
amputa�ons, degenera�ons or deformity of limbs, heart and blood vessels
disease, circulatory disorders, overweight or abnormal underweight.
3. Assembly
UNFOLDING AND ASSEMBLY
Step 1. Unfolding the wheelchair
Place the wheelchair on the ground. Grab the wheelchair by the armrests and
unfold it. Then, press down on the center of the seat so that all the elements fit
together. Push down the stabilizing push bar located behind the backrest (picture
1) un�l you hear a clicking sound.
Step 2. Assembly of footrests
Fix the footrest on the outer side of the frame. Then turn the footrest inwards
un�l it is locked.
Step 3. Adjustment of footrests
• Adjust the inclina�on angle of the footplate using your hands. To bring back
footrests lower, press lever located on the frame (K).
• Adjust the footrest plates using the screw located on the tube. Enough space
should be le� between the footplates and the ground as footplates set too
low may cause difficul�es in climbing hills and curbs. Adjust the footplates
Picture 3
34